GRANVILLE PHILLIPS MULTIPLE GAUGE CONTROLLER

Multiple Gauge Controllers

Multiple Gauge Controller

Granville Phillips Model 360, can replace 307 controller.

Dual Ion gauge, Dual Convectron gauge, Dual Thermocouple Gauge and Stabil-ion remote control.

Representative Photo, may be configured as two separate units for half 19" rack mount

1 unit @ $1,650.00

Make: Granville Phillips

Model: 360

Item ID: 209711

Manufacturer	Granville Phillips
Model	360
Description	Dual Ion/Dual Convectron Controller/ Dual Thermocouple
Gauge Types Controlled	Ion; Convectron; Thermocouple
Cables Included	No
Accessories	Contains Modules: 360106 for Dual Convectron Gauges 360104 for Stabil-ion remote control Optional 6 channel process control board, can be added if available, +$545 Cable between controller and the power supply included. Ion gauge cables see items 6799, 179524, 209733
Other Information	Controller has Dual Thermocouple module that provide power for two Thermocouple gauges but will not display pressure on the front panel, it has two 3.5 mm jack connectors to output analog pressure signal. This controller can be calibrated for different ion gauges, calibration for each channel is loaded via memory modules. If you have standard Bayard-Alpert glass gauge, CBI can upload average calibration for that gauge with sensitivity 10/Torr to channel one, two or both. If you have Stabil-Ion gauge with individual module containing calibration for that gauge, you should upload that to the controller before using it. If you have Stabil-Ion gauge without individual module, CBI can upload average calibration with sensitivity 50/Torr to channel one, two or both. Specify type and sensitivity of your gauges and input power 115VAC or 230VAC when ordering. Click here for the manual
Power Requirements	115/ 230 V 50/60 Hz 1 Phase
Exterior Dimensions
Width	19.000 in (48.3 cm)
Depth	11.000 in (27.9 cm)
Height	3.500 in (8.9 cm)
Weight	14 lb (6 kg)

Shipping & Handling

Unless otherwise stated, all items will be fully tested and sold with our standard ninety day warranty, which is described in our terms and conditions.

Our standard procedure is to service the equipment as orders are placed. Lead times can vary depending on the item.

Domestic and International shipments: Ex Works, Scotia, NY. All freight cost estimates are for dock to dock service only.

Any additional services, i.e. lift-gate, inside or residential delivery, must be requested at the time of sale and will be billed accordingly.

CBI is not responsible for any damage incurred during shipment. It is the buyer's responsibility to inspect packages for damage and to note any damage on bill of lading.

Please feel free to call us with any questions. (Phone: 518.346.8347, 844-833-8347, Fax: 518.381.9578).

Payment

Minimum order of $50 required.

We offer terms of net 30 days to all companies that have established credit with Capovani Brothers Inc. and have paid within terms.

All federal, state, local governments and their agencies, as well as institutions of higher learning automatically receive terms.

All other sales, including foreign sales, are prepayment only.

MasterCard, VISA, Discover and AMEX are accepted at sellers discretion.

Domestic Terms and Conditions

International Terms and Conditions