Control via front panel, the serial communication port or analog remote port
The following parameters can be programmed /
monitored via the serial communication port
1. Output Voltage setting.
2. Output Current setting.
3. Output Voltage measurement.
4. Output On/Off control.
5. Output Current measurement.
6. Foldback protection setting
7. Over-voltage protection setting and readback.
8. Under-Voltage limit setting and readback.
9. Power-supply start up mode (Auto-restart or Safe-start mode).
Manual is here: https://product.tdk.com/info/en/products/power/tec_data/ps_system_genesys.html
